Filter By:
BMX

$29.99
The Springfield Brake Kit will provide easy braking upgrades along with value, as the kit will be more affordable than buying each part individually. All necessary hardware will be included as well. Doesn't get much better!
- One spring design
- Comes with GHOST PADS
- Hinged lever clamp
- Medium sized lever

$12.99
Keep your straps tidy and out of your way, using WeThePeople Cable Straps. They're easy to install and look good. This 10-pack helps keep that ride clean and tight.
- 10 straps included

$9.99
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike.
• 150mm Long, 27.8mm Diameter
• 30 durometer rubber
• Low flange design
• Includes WeThePeople nylon barends

$9.99
Sunday's Cornerstone Grips rock traditional styling, current branding, and come in at 150mm in length with plenty of color options. It's not a bad idea to keep an extra pair around.

$9.99
The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.

$5.99
Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer).
- Length: 4.4-inch
- Diameter: 1.6-inch
- Material: Plastic (Thermalite)
- Weight: 0.8- ounce each
- Replacement sleeve only
- Sold individually

$25.99
A classic knobby version of the Aitken signature tire. Traditionally a more dirt-specific tire but the tire’s fast rolling center tread allows it to be used on all terrains.
- 20 × 2.35 only Single ply casing

$14.99
For the Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.

$9.99
Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.

$19.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers.
- Sized and dimensioned specifically for BMX.

$4.99
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

$12.99
This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology.
- Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated.
- Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008.
- Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables.
- Gyro lug included at one end of the inner wire for use with detanglers.
- 60-65mm in length.
- Black

$9.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz).
- Black
- 60 – 65mm

$5.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Improved braking power for Gyro users
- Left/Right hand compatible

$3.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

$26.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 10mm, 3mm and 2mm (15mm total)
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1-1/8 integrated headset.
- 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).

$24.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 15mm dust cap. With 3mm, and 2mm spacers
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1 1/8-inch integrated headset.
- 45º tapered bearings
- 41.8mm outer diameter (fits 42mm BMX head tubes).

$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs.
SPECS
- Forged from 7075-T6 aluminum for greater strength and durability
- Steel insert prevents guard deformation, prolonging bearing life

$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal® processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 32mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)

$14.99
Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable.
- Length: 60 – 65mm
- Black
Page 1 of 1